speaker. So if you are unsure of what a patch does, it is also a good idea to switch the
internal speaker o
ff
. There are two switches on the back to enable speaker and select
input, see Chapter 2 for more information.
Getting Started
For the simplest configuration, follow these steps.
1.
First connect the power adapter, or insert batteries.
Connect the adapter to a power
outlet, and then connect its plug to the leftmost port on the back of the Organelle. You
can also insert 4 AA batteries into the battery port housed on the bottom of the
instrument. When starting a patch for the first time, it is a good idea to set the input to
line in using the small switch on the back (see Chapter 2 for more information).
Once the Organelle is connected to power, move the
Power
switch to the
On
position.
The OLED Screen will be blank at first. The LED will be steady pale green for a brief time
and then blink on/o
ff
blue. The screen will display the
Patches
menu when this process
is done.
2.
Set the volume of the speaker.
The Vol knob on the top right of the Organelle controls output volume. Start with this
knob all the way to the left (no sound). From the front of the Organelle, peer over the
