32
© 2022 All rights reserved. Data subject to change without notice.
FCS - Operation Manual
Rev. C | 2022.02
6.4.1 How to Enable / Disable Data Logging and Change Logging Interval
Press Menu and enter passcode “1001” to enter the Basic menu and select Data Logger.
Minutes:
Enter the logging interval you want to set. Factory default is 5 minutes. The
system will log the value at each 5 minute mark. Minimum is 1 minute, maximum is 1080
minutes (18 hours).
Enable/Disable:
Use the + or - buttons to choose to enable or disable the data logging
functionality.
NOTE:
The correct time and date should be set prior to enabling data logging. Refer to
Section 6.2 Set Clock for more information.
Press Enter to save.
6.4.2 How to Clear a Data Logging Failure Fault
If something happens to the SD card - it becomes corrupt, dislodged or full - the home
display will show a Data Log Failure Fault and the data logging functionality will be disabled.
To clear the fault, fix the SD card issue and go into the Basic Menu using passcode 1001 and
enable data logging in the Data Logger menu.
6.4.3 How to Delete Data Log Files
A log file is created every 24 hours at midnight local time and every time the FCS is powered
up/restarted. Over time the files take up space and can slow down the logging system. You
can delete all or select individual files of log files to delete.
Press Menu and enter passcode “6045” to enter the menu and select 2 - Logs.
Delete
: On this screen, pressing Delete, deletes all log folders and files.
Open:
Press the Open button to drill down to the list of folders containing the log files.
The folders are listed in the order they were created and named by year_month (eg.
1-2021_04)
Pressing on a folder will turn it green, indicating that has been selected. You can select
one or mulitple folders. If you want to select all the folders press the Select All button.
To access the individual log files, choose the folder and press the Open button. The
individual log files are listed in the order they were created and named year month
day_time (eg. 3-210407_1512.CET). Again you can press Select All to delete all the files
or choose the one(s) you want to delete by pressing one or more files and then pressing
Delete.
Press Back to go back to the previous screen or press Home to exit.