10
© 2022 All rights reserved. Data subject to change without notice.
FCS - Operation Manual
Rev. C | 2022.02
mounted strobe, internal heater and a water tight, door mounted audible alarm.
• The FCS can be connected to a remote strobe/horn combo, an RDM Remote Display
Module, and the following peripheral devices: LNK-AO Analog Output, LNK-AI Analog
Input, LNK-XT Network Extender, RLY-4 Remote Relay, RLY-8 Remote Relay and RPS-
24VDC Remote Power Supply.
• Six conduit entry ports
• Thermal resetting fuses
• RoHS compliant circuit boards
* The maximum number of combined INTERNAL analog inputs and analog outputs is 4 of
each.
If after reading through the manual you have any questions, please do not hesitate to contact
our service department for technical support.
2.3 Technical Specifications
GAS TYPE
No internal gas sensors
MECHANICAL
Enclosure
ABS / Polycarbonate, rated UL94-HB. Copper coated interior to
reduce RF interference. IP54 rating with door mounted, water
tight buzzer installed.
Weight
1.8 kg / 4 lbs
Size
254 mm x 226 mm x 113 mm / 10 in x 8.9 in x 4.44 in
USER INTERFACE
Display
8.1 cm / 3.2 in graphic, 1/4 VGA full colour resistive touch LCD
display and LED indicators for “POWER”, “STATUS 1, 2 and 3” ,
“FAULT”
Data Logging
Enabled, logging interaval set to 5 minutes
INPUT/OUTPUT
Inputs
- Modbus® RTU RS-485
- 4 or 8 internal 4-20 mA analog inputs (Option -AI or -2AI)
- Peripheral devices on Modbus® RTU RS-485 network
Outputs
- Modbus® RTU RS-485 or BACnet® MS/TP to BAS
- 4 or 8 internal 4-20 mA analog outputs (Option -AO or -2AO)
- Remote and Peripheral devices on a Modbus® RTU RS-485
network
- 2 drive outputs for strobe/horn (0.5 Amp @ 24 VDC)