© 2022 All rights reserved. Data subject to change without notice.
23
Rev. C | 2022.02
FCS - Operation Manual
4.3.2 Channel, Scrolling Display
The Channel view of the home screen display shows and scrolls through the Channel Status
Bars for each channel. The scroll rate is user defined.
Press Menu and enter passcode “1014” to enter the Display Menu and select FCS Display.
Press the - or the + to change the FCS Mode from Summary to Channel.
Choose the scroll rate by pressing the _ or + or entering the number in the field.
To save the configuration, press ENTER. Press HOME to return to the home screen.
4.3.3 Recalibrating the Display to Improve Response
The FCS has a 1/4 VGA full colour resistive touch LCD display. A certain amount of pressure
is required to engage the buttons, as is a certain length of time. If the touch response is not
working as well as it used to, you can recalibrate the display.
Hold the Reset/Restart button for approximately 15 seconds and let go. As soon as the
screen goes blank immediately touch and hold the display anywhere on the screen until you
see the ‘Performing touch screen calibration’ message.
Touch the screen to continue.