© 2022 All rights reserved. Data subject to change without notice.
29
Rev. C | 2022.02
FCS - Operation Manual
Alarm Setpoints
values are gas
dependant
Ascending
values are gas dependant
Ascending, Descending (ie. O
2
)
LAN Modbus®
Baud Rate
19,200
changing is not recommended
WAN Modbus®
Baud Rate
Modbus ID
19,200
100
Refer to Section 11.4 for list
1 to 127
WAN BACnet®
Baud Rate
Base Address
MAC Address
Instance ID
76,800
270
100
270100
Refer to Section 11.4 for list
1 to 999
1 to 127
Base Address x 1000 + MAC
Address
Analog Input Calibration
4 - 20 mA
0 - 20 mA
Analog Output Calibration
4 - 20 mA
0 - 20 mA
STEL/TWA
Display
Channel Alarm
Global Alarm
Off
Disabled
Disabled
On, Off
Disable, Enable
Disable, Enable
The Basic menu allows you to set parameters such as the date and time, data logging
sample rate, Modbus
®
ID and baud rates (or BACnet® ID and baud rate if an FCS-B model).
6.2 Set Clock
Allows you to set the correct date and time.
This is a 24 hour clock (ie. 9am = 09 and 1pm = 13).
Press Menu and enter passcode “1001” to enter the Basic menu and select Set Clock. Use
the + or
-
buttons to increase or decrease the numbers or press the yellow fields and use the
keypad to match the current Year, Month, Day, Hour and Minute. Press Enter to save.