background image

Crestron 

QM-RX

  QuickMedia™ 

Receiver

 

Return and Warranty Policies 

Merchandise Returns / Repair Service 

1.  No merchandise may be returned for credit, exchange, or service without prior authorization 

from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory 
and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying 
the nature of the problem, name and phone number of contact person, RMA number, and 
return address. 

2.  Products may be returned for credit, exchange, or service with a CRESTRON Return 

Merchandise Authorization (RMA) number. Authorized returns must be shipped freight 
prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J. 07647, or its authorized subsidiaries, 
with RMA number clearly marked on the outside of all cartons. Shipments arriving freight 
collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right 
in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any 
products returned with an RMA. 

3.  Return freight charges following repair of items under warranty shall be paid by CRESTRON, 

shipping by standard ground carrier. In the event repairs are found to be non-warranty, return 
freight costs shall be paid by the purchaser. 

CRESTRON Limited Warranty 

CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in 
materials and workmanship under normal use for a period of three (3) years from the date of purchase 
from CRESTRON, with the following exceptions: disk drives and any other moving or rotating 
mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year; 
touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps 
are not covered.  

This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON 
dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, 
if any. 

CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any 
application other than that for which it was intended, or if it has been subjected to misuse, accidental 
damage, modification, or improper installation procedures. Furthermore, this warranty does not cover 
any product that has had the serial number altered, defaced, or removed.  

This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall 
CRESTRON be liable for incidental or consequential damages of any kind (property or economic 
damages inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for any 
claim made by a third party or made by the purchaser for a third party.  

CRESTRON shall, at its option, repair or replace any product found defective, without charge for parts 
or labor. Repaired or replaced equipment and parts supplied under this warranty shall be covered only 
by the unexpired portion of the warranty. 

Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or 
implied, nor authorizes any other party to offer any warranty, including any implied warranties of 
merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law 
are limited to the terms of this limited warranty. This warranty statement supercedes all previous 
warranties. 

 

Trademark Information

 

All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a registered 
trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft Corporation. 

 

Operations Guide – DOC. 6333 

 

QuickMedia™ Receiver: QM-RX 

 

 

43

Summary of Contents for QuickMedia QM-RX

















































Reviews: