QuickMedia™ Receiver
Crestron
QM-RX
Repeat this procedure for each additional network device requiring a Net ID
change.
Mounting
The QM-RX can be mounted using the included four mounting brackets. Each
bracket measures 1.6 in long, 0.5 in wide and 0.75 in high. Attach the included
four brackets using the existing cover screws located on the sides of the QM-RX
as shown in the following diagram.
Mounting Positions of the Four Included Mounting Brackets
NOTE:
The MK-QM-RMCRX mounting kit is available for mounting the
QM-RX to a pipe.
Details can be found in the latest version of the
MK-QM-RMCRX Installation Guide (Doc. 6247), available from the Crestron
website.
Hardware Hookup
Refer to the following hookup diagram and, aside from attaching power last,
complete the connections in any order.
NOTE:
To prevent overheating, do not operate this product in an area that
exceeds the environmental temperature range listed in the specifications table.
Consideration must be given if installed in a closed or multi-unit rack assembly
since the operating ambient temperature of the rack environment may be greater
than the room ambient. Contact with thermal insulating materials should be
avoided on all sides of the unit.
●
QuickMedia Receiver: QM-RX
Operations Guide – DOC. 6333
16
Summary of Contents for QuickMedia QM-RX
Page 1: ...Crestron QM RX QuickMedia Receiver Operations Guide...
Page 4: ......
