QuickMedia™ Receiver
Crestron
QM-RX
Front Panel Ports
The QM-RX front panel ports are illustrated and described as follows.
Q M
8
1
QM (Input)
The 8-pin RJ-45 QuickMedia transport port accepts CAT5E or CAT6 video
and control signals. The QM input port conforms to the 568B wiring standard.
Refer to page 2 and page 12 for additional QuickMedia wiring information.
NOTE:
To determine the location of pin 1 on an RJ-45 male connector, hold
the connector with the cable down and the clip facing away from you. Pin 1 is
on the far left.
NET
The four-pin 5 mm detachable terminal block NET connector is used for
connection to Cresnet and expansion to other peripherals.
Pins 24 and G provide 24 VDC and ground.
Pins Y and Z provide communications (data).
Power to the unit (8 W) is supplied through this connector.
Rear Panel Ports
The QM-RX rear panel ports are illustrated and described as follows.
RGBHV
1
10
15
RGBHV
One DB15HD female connector is provided for RGB video output.
DB15HD Connector Pinout
PIN DESCRIPTION PIN
DESCRIPTION
1 Red
Signal
9 N/C
2
Green Signal
10
Sync Ground
3 Blue
Signal
11
N.C.
4
Reserved
12
Pullup
5 Ground
13
Horizontal
Sync
6
Red Ground
14
Vertical Sync
7 Green
Ground
15
Pullup
8
Blue Ground
●
QuickMedia Receiver: QM-RX
Operations Guide – DOC. 6333
8
Summary of Contents for QuickMedia QM-RX
Page 1: ...Crestron QM RX QuickMedia Receiver Operations Guide...
Page 4: ......
