Crestron
QM-RX
QuickMedia™
Receiver
Installer’s Toolbox “Address Book” Window – Serial Setup
3. After setting the correct parameters, click
OK
to return to the
Installer’s Toolbox main window.
4. Click
Tools | Network Device Tree
to display the devices in the
system.
TCPIP Connection to Control Processor
1.
Ensure that all devices are connected to the control processor. For
TCP/IP, use CAT5 straight through cables with 8-pin RJ-45 connectors
to connect the LAN port on the control processor and the LAN port on
the PC to the Ethernet hub. Alternatively, you can use a CAT5
crossover cable to connect the two LAN ports directly, without using a
hub. The following table illustrates pinouts for straight through and
crossover RJ-45 cables. Pins 4, 5, 7, and 8 are not used.
Operations Guide – DOC. 6333
QuickMedia™ Receiver: QM-RX
●
35
Summary of Contents for QuickMedia QM-RX
Page 1: ...Crestron QM RX QuickMedia Receiver Operations Guide...
Page 4: ......
