Crestron
QM-MD7x2
QuickMedia™ Matrix Switcher/Mixer
4. Click on the
Search for Touch Settable Devices
button. The system
searches the network and lists all TSID-enabled devices found. The list is
similar to the report produced by pressing
F4
(Report Network Devices);
the first eight digits of each line constitute the TSID number (hexadecimal
form of the serial number).
“Set Net ID by TSID” Window
5. Enter either the serial number or TSID number of the device that requires a
change. The list scrolls to and highlights the device listing. The listing
should show the device’s default Cresnet ID (a.k.a. Net ID).
6. Enter the Cresnet ID that the device should be set to and click
OK
. The
number you enter should appear on the list.
CAUTION:
This function does not prevent you from setting duplicate IDs. Be sure
to check current assignments before entering the desired Cresnet ID number.
Serial Number to TSID Conversion
This utility is useful in a case where there are multiple devices of the same type on a
network, you need to locate a particular one, you know the TSID but not the serial
number, and your site installation list is based on device serial numbers. In this (or
the reverse) situation, do the following:
1. Open the Crestron Viewport.
2. From the Viewport menu, select
Functions | Serial Number
TSID
Conversion Tool
. The “Serial Number
TSID Conversion Tool”
window is displayed.
Operations Guide - DOC. 6273
QuickMedia™ Matrix Switcher/Mixer: QM-MD7x2
•
19
