QuickMedia™ Matrix Switcher/Mixer
Crestron
QM-MD7x2
QM-MD7x2, Slot 8 Digital Input Signal Descriptions (continued)
INPUT DESCRIPTION
SaveCompPreset
Saves the source gain compensation given by the
analog signal
CompToSave
to the preset given by
the analog signal
CompPreset#ToSave
when the
input is held high.
High/1 (level-sensitive) = Save compensation
preset; Low/0 = No preset save
QM-MD7x2, Slot 8 Analog Input Signal Descriptions
INPUT DESCRIPTION
CompToSave
Sets the source gain compensation that will be
saved to the preset given by the analog signal
CompPreset#ToSave
when the digital signal
SaveCompPreset
is held high.
Valid analog values range from -100d (-10 dB) to
+100d (+10 dB), adjustable in increments of 0.1
dB. Changing the analog value by 1d signifies a
boost or attenuation of 0.1 decibels.
A trim of 0d (0 dB) means that the signal will pass
unaffected.
CompPreset#ToSave
Sets the preset number where the source gain
compensation given by the analog signal
CompToSave
will be saved.
Valid values range from 1d to 192d. Out-of range
values are ignored.
AudioOut1SpVolume
Adjusts the volume level of the SP channel of
AUDIO OUT 1.
Valid values range from 0% (-80 dB) to 100% (+20
dB).
AudioOut1SpBass and
AudioOut1SpTreble
Adjusts the treble and bass levels of the SP
channel of AUDIO OUT 1.
Valid values range from 0% (-15 dB) to 100% (+15
dB). A value of 50% signifies a flat level
corresponding to 0 dB.
AudioOut1SpDelay
Sets the speech delay, in milliseconds, on the SP
channel of AUDIO OUT 1.
Valid analog values range from 0d (0ms) to 40d
(40ms).
AudioOut1LVolume
Adjusts the volume level of the PRG L channel of
AUDIO OUT 1.
Valid values range from 0% (-80 dB) to 100% (+20
dB).
AudioOut1RVolume
Adjusts the volume level of the PRG R channel of
AUDIO OUT 1.
Valid values range from 0% (-80 dB) to 100% (+20
dB).
AudioOut1PrgComp
Adjusts the source gain compensation on the PRG
L and PRG R channels of AUDIO OUT 1. The
source gain compensation is added to the program
volume and is applied equally to both channels.
Valid analog values range from -100d (-10 dB) to
+100d (+10 dB), adjustable in increments of 0.1
dB. Changing the analog value by 1d signifies a
boost or attenuation of 0.1 decibels.
(continued on next page)
64
•
QuickMedia™ Matrix Switcher/Mixer: QM-MD7x2
Operations Guide - DOC. 6273
