IMedia Receiver/Processor
Crestron
IM-RX1 & IM-RX3
“Power Lockout” Window
During the lockout period, the power button on the IM origination point is
disabled, and any projector lift commands will be locked out. In addition, the
system will notify the RoomView help desk of the projector power state (if you
enable RoomView monitoring).
You should refer to the manufacturer's documentation to find the recommended
cool-down and warm-up time for the display device.
The power lockout values can be set from zero to 999 seconds (approximately
15 minutes). The default values are 30 seconds for the Power On Lockout, and
30 seconds for the Power Off Lockout.
Display devices that do not contain lamps do not typically require a power
lockout time. For these devices you can disable the power lockout feature by
setting both values to zeros.
Display Options
These advanced options allow you to add screen and projector lift controls to the
iMedia system.
“Display Options” Window
18
•
iMedia Receiver/Processor: IM-RX1 & IM-RX3
Operations & Installation Guide - DOC. 6384
