Crestron
IM-RX1 & IM-RX3
iMedia Receiver/Processor
IM-RX1/IM-RX3 Specifications (continued)
SPECIFICATION DETAILS
Video Formats
RGBHV (VGA), RGBS, RGsB
RGB Video
R/G/B: 0 dB (Unity gain, 75
Ω
termination), for
1.0 V
p-p
max input. Input Impedance 75 Ohms.
Gain / Bandwidth
Supports videos up to XGA @ 60 Hz vertical
rate with maximum cable length of 84 feet and
maximum compensation at receiver. For higher
pixel resolutions (up to 1600 X 1200 pixels at 60
Hz vertical rate) refer to the chart on page 3.
H and V Sync
5 V
p-p
max into 1 K Ohm
Audio
Line Level Output
Maximum balanced output: 4 V
rms
(per channel)
Maximum unbalanced output: 2 V
rms
(per
channel)
Output balanced impedance: 200
Ω
Output unbalanced impedance: 100
Ω
SNR 20 Hz – 20 KHz A-weighted 82 dB
THD+N 20 Hz – 20 KHz 0.05%
Frequency Response 20Hz – 20 KHz,
+/- 0.5 dB
Amplified Audio
10 W maximum per channel into 8
Ω
only (Use
of 4
Ω
speakers may cause the amplifier
protection to trigger at high volume settings)
SNR 20Hz – 20 KHz A-weighted 80 dB
THD+N max 20 Hz – 20 KHz 0.7%
Frequency Response 20 Hz – 20 KHz, +/- 1 dB
On-Board Memory
16 MB RAM, 4 KB EEPROM
4 MB Flash Memory
Operating Temperature and
Humidity
41º to 104º F (5º to 40º C)
10 to 90% relative humidity (non-condensing)
Dimensions and Weight
Width: 8.60 in (21.85 cm)
Height: 1.62 in (4.10 cm)
Depth: 7.58 in (19.24 cm)
Weight: 1.75 lbs (0.80 kg)
Accessories
(4) Mounting Brackets (included)
Pipe Mounting Kit, QM-FTCMK (not included)
STIRP - IR Probe (not included)
CNXRMCS - Current Sensor (not included)
Operations & Installation Guide – DOC. 6384
iMedia Receiver/Processor: IM-RX1 & IM-RX3
•
5
