Crestron
IM-RX1 & IM-RX3
iMedia Receiver/Processor
Front Connections – IM-RX3 Shown
Rear Connections
NOTE:
the power supply cable is equipped with a snap lock connector. Always
disconnect the power cable by pulling back on the snap lock of the connector.
Never pull the power cable by the cord.
Accessories (Available Separately)
The STIRP contains an infrared (IR) LED housed in a miniature, mouse-shaped,
black, injection molded plastic shell. The STIRP shell emits IR control signals
sent to it by the control processor. The shell can be installed directly on the IR
Operations & Installation Guide – DOC. 6384
iMedia Receiver/Processor: IM-RX1 & IM-RX3
•
13
