Crestron
C2N-DAP8
Digital Audio Processor
Operations Guide – DOC. 8186
Digital Audio Processor: C2N-DAP8
•
35
SPEAKER CONFIG Window
Use this screen to specify the speaker arrangement of your system and to set the
crossover frequency for the subwoofer.
Click on the appropriate buttons to identify the existing speaker arrangement. Note
that the front and the surround speakers are treated as pairs. Select the appropriate
one of the
X-OVER
buttons to specify the crossover frequency for the subwoofer (if
present). The distinction between large and small speakers here is their ability to
provide
effective
sound in the low frequency range (120 Hz and below), not their
physical size. Speakers designated as large will receive low frequency signals. Low
frequency signals appearing in channels with speakers designated as small will be
filtered out and routed to the subwoofer. Check the frequency range rating of all
speakers to determine their proper setting.
Audio Configuration
Select the
AUDIO CONFIG
button. The screen displays the AUDIO CONFIG
window. Use this screen to set up the volume trims, the delays, and the noise
generator settings. These settings are used together during room calibration.