Digital Audio Processor
Crestron
C2N-DAP8
36
•
Digital Audio Processor: C2N-DAP8
Operations Guide - DOC. 8186
AUDIO CONFIG Window
Use the VOLUME TRIMS settings to specify the relative gain for each speaker in
the room. Settings range from –12dB to 12dB in 0.5dB increments.
Use the DELAY X 1ms settings to specify the delays needed to ensure that the sound
from all speakers reach the listener’s ears at exactly the same time. Enter the delays,
from 0 to 15 milliseconds, for each speaker by using a Real Time Analyzer (RTA)
equipped to give a millisecond value from the time the sound was produced to the
time it reaches the listener’s position. One example of such a device is the Audio
Controls Iasys RTA.
Use the NOISE GENERATOR buttons to select the noise source. The default
STD
(Dolby) button toggles to
PINK.
Press
BYPASS
to bypass all equalization filters
and volume/tone controls. Use the
ON
and
MUTE
buttons to turn each speaker on
and off.