Digital Audio Processor
Crestron
C2N-DAP8
38
•
Digital Audio Processor: C2N-DAP8
Operations Guide - DOC. 8186
Audio Switching
Select the
AUDIO SWITCH
button to display the AUDIO SWITCHING window
used to select the analog audio source you wish to appear on the three possible
outputs.
AUDIO SWITCHING Window
This window lets you select the analog audio source that will appear on the CAT5,
OUTPUT A, and OUTPUT B audio output connectors. You can also choose to mute
the signal to those outputs.
The OUTPUT B CONTROLS section affects only the signals to OUTPUT B. The
BASS, TREBLE, and BALANCE controls are initially set to their middle positions;
the VOLUME control is set to its zero position.
The three buttons at the bottom provide both electronic and relay mute control of all
outputs, and a standard ‘loudness’ selection that provides emphasized treble and
bass. The electronic mute reduces the level of the output to –80dB (effectively
silent); the relay mute opens the output circuits.
Selecting Sources
After performing all the system setup procedures, press
RETURN
to display the
default main screen. Use the SOURCE SELECT buttons to choose the desired audio
source.
