Crestron C2N-DAP8 Operation Manual Download Page 25 | Manualshive

Page: 25 / 72

background image

Crestron

C2N-DAP8

Digital Audio Processor

Operations Guide – DOC. 8186

Digital Audio Processor: C2N-DAP8

•

21

Toolbar Icons

The following paragraphs describe some of the unique toolbar icons that provide
quick access to important digital audio tools functions.

Realtime Mode

The Digital Audio Tools Realtime Mode permits all changes to be transferred to the
device immediately. This is especially useful during calibration of the room.

To select Realtime Mode, click the Realtime Mode icon on the Digital Audio Tools
toolbar, select

Tools | Realtime Mode

. The system displays the following message:

As suggested in the message, synchronize the application and the device by
performing a “Send To Device” or “Load From Device” transfer from the
Communications tab screen before attempting any real-time equalizer configuration
changes. Refer to “Communications” on page 24 for additional details.

Source/Noise Steering

The Digital Audio Tools program “Source/Noise Steering” window is for selecting
internal noise and external audio sources for calibrating the other parameters in the
system. Refer to “Using Source/Noise Steering for Calibration” on page 22. The
option is only available if you are working in Realtime mode. Clicking the
Source/Noise Steering icon displays the screen shown below.

This screen lets you select any available source signal from any of the C2N-DAP8
audio ports or internal noise and direct it to a particular speaker to enable setting the
filters for optimum response.

«
...
23
24
25
26
27
...
»

Summary of Contents for C2N-DAP8









































































Reviews:

No comments

Related manuals for C2N-DAP8

Brand: Moulinex Pages: 64

QG-KIT-VA-3IN-W

Brand: QualGear Pages: 6

Brand: Moulinex Pages: 19

Brand: IPC Solutionki Pages: 69

mark levinson 30.5

Brand: Madrigal Audio Pages: 38

Brand: peerless-AV Pages: 28

Brand: peerless-AV Pages: 5

Brand: peerless-AV Pages: 16

Brand: Strong International Pages: 44

Brand: SQ Professional Pages: 8

Brand: SQ Professional Pages: 8

Brand: Kramer Pages: 89

Brand: THORLABS Pages: 36

Brand: Vitek Pages: 24

Brand: Vitek Pages: 32

Brand: Brentwood Appliances Pages: 12

Brand: Brentwood Appliances Pages: 21

Brand: Magic Bullet Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands