Crestron
C2N-DAP8
Digital Audio Processor
Operations Guide – DOC. 8186
Digital Audio Processor: C2N-DAP8
•
11
6. Click
Set ID
to initiate the change. This will display the message "ID
command has been sent.”
7.
In the "Command Complete" window, click
OK
.
8. In
the
Current Network Devices
window, verify the new Net ID code.
(The Net ID can also be verified from the
Diagnostics
menu. Select the
Report Network Devices
command.)
9.
In the "Set Network ID" window, click
Close
.
NOTE:
The new NET ID code may also be verified by selecting
Diagnostic |
Report Network Devices
in the Viewport (alternately, select
F4
).
10.
Repeat this procedure for each C2N-DAP8 to be added to the system.
Method B (Touch Settable IDs)
Before using this method, you should have a list of all current network devices and
their Net IDs, to avoid assigning duplicate IDs.
Set Net ID by TSID
These procedures are for TSID-enabled network devices during the initial
configuration of a Cresnet system or when such devices are being added/replaced.
1.
Ensure that all C2N-DAP8s are connected to the control system.
2.
Open the Crestron Viewport version 3.35 or later.
3.
From the Viewport menu, select
Functions | Assign Cresnet ID by
Serial Number
. The “Set Net ID by TSID” window appears. The
window is first displayed with the data fields empty.
“Set Net ID by TSID” Window