![background image](http://html1.mh-extra.com/html/creative/blaster-pc-m004/blaster-pc-m004_user-manual_2680780019.webp)
The Pentium® II Processor 2-5
3. Insert the four RMAM pegs through the motherboard and the
RM. Secure the RM to the RMAM assemblies by screwing the
four captive nuts onto the four RMAM pegs. (see Figure 2-5.)
Two RMAMs and four captive nuts are required for each
assembly.
Components of the Pentium II Processor’s heat sink
support
The Heat Sink Support (HSS) consists of the following parts:
❑
HSS Base
A plastic support bar
mounted to the motherboard
under the ATX heat sink.
❑
HSS Pins
Plastic pins inserted through
the HSS base to secure it to the
motherboard.
Two pins are required for each
assembly.
❑
HSS Top Bar
A plastic bar that clips onto
the HSS base through the
fins of the ATX heat sink.
Figure 2-6: The HSS base.
Figure 2-7: The HSS pins.
Figure 2-8: The HSS top bar.