![background image](http://html1.mh-extra.com/html/creative/blaster-pc-m004/blaster-pc-m004_user-manual_2680780060.webp)
Memory Configuration and BIOS Settings 6-17
Throttle Duty Cycle
This item defines the duty cycle for the clock
control thermal throttling mode. The duty cycle
indicates the percentage of time while in the
thermal throttle mode. The available settings are
between 12.5% and 87.5%.
VGA Active Monitor
If this item is enabled, the VGA activity event will
be monitored to reload the global timer.
Soft-Off by
PWR-BTTN
(This feature is
available for ATX
power only.)
When this item is set to Instant-Off, the ATX
switch functions as a normal system power-off
button when pressed for less than 4 seconds. The
setting of Delay 4 Sec allows the button to have a
dual function, whereby pressing the button for
less than 4 seconds will place the system in
Suspend mode, and pressing the button for more
than 4 seconds will shut the system off.
IRQ 8 Break Suspend
You can enable or disable the monitoring of IRQ8
(the Real Time Clock) so that it does not wake the
system from Suspend mode.
** Reload Global Timer Events **
If any of these items is enabled, that particular
system activity event will be monitored to reload
the global timer.
These items include IRQ[3-7, 9-15], NMI,
Primary IDE0/1, Secondary IDE 0/1, Floppy
Disk, Serial Port and Parallel Port.
Resume by LAN
(Wake-ON-LAN)
This item defines if the system will resume by
activity of LAN. If this feature is enabled, the
system will power-on itself from power off when
the activity of LAN.
M004 supports Wake-ON-LAN function with
Intel LAN cards only.
Resume by Ring
When this item is enabled, the system will resume
through the activation of the modem ring.
Resume by Alarm
When this item is enabled, you can set the system
to resume at a certain date and time. This feature
is available for ATX power only.
Table 6-7:
The Power Management Setup Screen items.
Item
Description