5-2 Jumper Settings
Changing Jumper Settings
This section provides instructions on how to configure some important
jumpers on your motherboard. These jumpers have already been set
to the factory default. If you do not need to change the jumper settings,
you can leave them as the factory default.
Do not change the jumper settings unless you are an advanced
user. Changing the jumper settings incorrectly may cause your
system to stop functioning.
Figure 5-1 is a diagram showing the relative positions of some of the
jumpers on the M004 motherboard.
Figure 5-1: Relative positions of jumpers on the M004 motherboard.
