Installing Blaster CD-RW 3
En
gli
sh
7.
Insert the drive into the open
5¼” bay, feeding the cables
through the bay.
8.
Secure the CD-RW drive to
your computer’s frame using
the supplied screws.
9.
Locate an available power
supply cable, and attach it to
the rear of the CD-RW drive.
10. Connect the data cable to an
available enhanced IDE
connector on your
motherboard, with the
cable’s colored stripe
connecting to pin 1.
11. Optional: Connect the CD
audio cable from your
CD-RW drive to your audio
card’s CD_IN connector.
12. Replace the computer cover.
13. Reconnect the power cable,
monitor, and other devices.
8
7
9
10
Power Supply
EIDE
Connector
Power Supply
Cable
Data Cable
The power supply is generally
located in a rear corner of your
computer, housed in a metal box
with several cables protruding
from it. If you do not have a spare
power supply cable, a splitter can
be purchased from your local
computer retailer.
Review your computer’s
documentation if you have
difficulty locating an enhanced
IDE connector on your
motherboard.