Installing Blaster CD-RW 1
En
gli
sh
1
Installing Blaster CD-RW
What You Need
Blaster CD-RW can be installed in our computer by attaching the drive to an enhanced IDE connector on
the motherboard. An ISA/Vl-bus interface may work, however, CD-ROM access time and transfer rate
may be reduced.
Data Cable
Screws for the
CD-RW Drive
CD Audio Cable
Phillips Screwdriver
(not included)
CD-RW
Software
CD
Creative CD-RW
Drive
Driver
Installation
Disc
Installing your Blaster CD-RW
requires you to perform the
following steps:
• Install the CD-RW drive
• Install the Creative CD-RW
software
Refer to the colored insert for
specific information about the
CD-RW drive.
