![background image](http://html.mh-extra.com/html/creative/blaster-2030/blaster-2030_user-manual_2680465048.webp)
Configuring the Wireless LAN USB Adapter 4-2
Configuring Settings
1. If the
Configuration Utility
icon does not appear on the taskbar, click
Start ->
Programs
(or
All Programs
)
-> Network Blaster 2030-01 -> Network
Blaster Wireless LAN USB Adapter utility
.
2. Double-click the
Configuration Utility
icon on the taskbar just near the clock
(see Figure 4-1). The
Configuration Utility
dialog box similar to Figure 4-2
appears.
3. Click the
Link Info
tab. The status of your wireless connection is displayed.
4. Click the
Re-Scan
button to locate and re-connect the network.
The Link Quality and Signal
Strength information appear
only in the default
Infrastructure
mode, and
not in
Ad-hoc
mode.
Figure 4-2:
Link Info
tab
State box
Displays the MAC Address of the network device
which is currently connected to your Wireless LAN
USB adapter.
Current Channel box
Displays the channel that the
Wireless LAN USB Adapter is
operating in.
Current Service Set Identifier box
Displays the SSID of the connected network device
Summary of Contents for Blaster 2030
