Creative Blaster 2030 User Manual Download Page 50

Page: 50 / 96

Configuring the Wireless LAN USB Adapter 4-4

12.To set the Wireless LAN USB Adapter to power saving mode, click the

Power

Saving Mode

box, and then click

Enabled

In Ad-hoc mode, the Power Saving Mode is not supported.

13.Click the

Apply Changes

button to save the settings.

Site Survey Settings

1. Click the

Site Survey

tab (see Figure 4-4).

2. Click the

Search

button to display or

refresh the list of available Access Points or

ad-hoc stations.

3. Click the Access Point or a wireless network

device you want to link with.

4. Click the

Connect

button.

Your computer automatically connects to

the selected Access Point or wireless

network device.

Figure 4-4:

Site Survey

tab

The entries in the

Link Info

tab is automatically updated

to reflect the selected Access

Point or ad-hoc station.

Summary of Contents for Blaster 2030

































































































Search results

Summary of Contents for Blaster 2030

Reviews:

Related manuals for Blaster 2030

Brands by name

Popular brands

Creative Blaster 2030, User Manual

Search results

Summary of Contents for Blaster 2030

Reviews:

Related manuals for Blaster 2030

Brands by name

Popular brands