Creative Blaster 2030 User Manual Download Page 74

Page: 74 / 96

Troubleshooting B-4

In Windows 2000/XP
1. Click the

Start

button and click

Run

.The

Run

dialog box appears.

2. In the

Open

box, type

command

3. At the command prompt, type

ipconfig

4. Press the

Enter

key.

5. Restart your computer.

Radio Interference.

Do the following:

❑

Adjust the antennas of the wireless access point until you get the best reception.

❑

Keep the access point and wireless clients away from microwave ovens, large

metal objects and 2.4 GHz cordless phones.

❑

If possible move the access point from its present location to another location

until you get the best reception.

If the Network
Blaster 2030-01
Setup dialog box
does not appear

Do the following:

❑

Go to the Start menu

❑

Click on the Run command

❑

Type in E:\wlsetup.exe (where E: can be replaced by the actual drive letter

assigned to your CD-ROM) in the prompt.

❑

Click the OK button.

Summary of Contents for Blaster 2030

































































































Search results

Summary of Contents for Blaster 2030

Reviews:

Related manuals for Blaster 2030

Brands by name

Popular brands

Creative Blaster 2030, User Manual

Search results

Summary of Contents for Blaster 2030

Reviews:

Related manuals for Blaster 2030

Brands by name

Popular brands