![background image](http://html.mh-extra.com/html/creative/blaster-2030/blaster-2030_user-manual_2680465052.webp)
Configuring the Wireless LAN USB Adapter 4-6
Advanced Settings
1. Click the
Advanced
tab (see Figure 4-6).
2. Click and drag the
Fragmentation
Threshold
and
RTS/CTS Threshold
sliders to the rate you want.
3. The
Security
box will only be highlighted
when WEP is enabled. Click the
Authentication Type
box, and then click
the option that matches your access point.
4. Click the
Preamble Type
box, and then
click the preamble type that you want.
5. Click the
Apply Changes
button to save the
settings.
Figure 4-6:
Advanced
tab
You are advised to use the
manufacturer’s default values.
If you have changed the
original settings, and would
like to return to the default
settings, click the
Restore
Defaults
button.
Summary of Contents for Blaster 2030
