Creative Blaster 2030 User Manual Download Page 92

Page: 92 / 96

Service and Warranty Information E-3

Warranty Information

CREATIVE (“the manufacturer”) warrants that equipment furnished

will be free from defects in material and workmanship for a period

of one (1) year from the confirmed date of purchase of the product

new from the retail location. Upon written notice of any such defect,

the manufacturer will, at its option, repair or replace the defective

item under the terms of this warranty, subject to the provisions and

specific exclusions listed herein.
This warranty shall not apply to equipment that has been previously

repaired or altered outside our plant in any way. Nor will it apply if

the equipment has been used in a manner exceeding its

specifications or if the serial number has been removed.
We do not assume any liability for consequential damages as a result

from our products use, and in any event our liability shall not exceed

the original selling price of the equipment.
The equipment warranty of Creative Technology Ltd., shall

constitute the sole and exclusive remedy of any buyer of the

manufacturer’s equipment and the sole and exclusive liability of the

manufacturer, its successors or assignees, in connection with

equipment purchase and in lieu of all other warranties expressed,

implied or statutory, including, but not limited to, any implied

warranty of merchantability or fitness and all other obligations or

liabilities of the manufacturer, its successors or assignees.

Summary of Contents for Blaster 2030

































































































Search results

Summary of Contents for Blaster 2030

Reviews:

Related manuals for Blaster 2030

Brands by name

Popular brands

Creative Blaster 2030, User Manual

Search results

Summary of Contents for Blaster 2030

Reviews:

Related manuals for Blaster 2030

Brands by name

Popular brands