background image

Assembly

NORTHBRIDGE WITH TENT

19949-100 Rev C (05-18)

© Copyright 2016, Creative Playthings

Page 7

COMPONENT VIEW

AA  2  35321-102  Leg 4 x 4 x 80"

AB  1  35322-102  Rung Leg 4 x 4 x 80"

AC  1  35323-102  Step Leg 4 x 4 x 80"

AD  2  35324-102  Main Beam 2 x 10 x 76"

AE  2  35327-102  Side Support 2 x 4 x 27-7/8"

AF*  1  35335-102  Stringer 2 x 4 x 66-7/8"

AG* 1  35336-102  Swivel Stringer 2 x 4 x 66-7/8"

AH* 1  40508-100  Cargo Net

Northbridge Tent With Posts

AI  2  35288-102  End Tent Support 2 x 6 x 83-1/2"

AJ  4  35344-102  Short Corner Post 4 x 4 x 40"

AK  2  40607-102  Tent Post Assembly

AL  3  14235-400  Tent Pipe 1-3/8" Dia. x 48-3/4"

AM  1  40606-400  Tent, Green

J  6  35246-102  Rock Board 5/4 x 6 x 27-1/4"

K  1  35247-102  Rope Board 5/4 x 6 x 27-1/4"

L  4  35248-102  Spacer Board 5/4 x 6 x 27-1/4"

M  1  35325-102  Rock Base Rail 2 x 6 x 59-3/4"

N  1  35326-102  Rope Base Rail 2 x 6 x 59-3/4"

O*  1  35328-102  Step Support 2 x 4 x 64-7/8"

P  1  35329-102  Rung Support 2 x 4 x 64-7/8"

Q*  2  35330-102  Center Block 4 x 4 x 5"

R*  2  35331-102  Inside Beam 2 x 6 x 66-7/8"

S  1  35332-102  Ladder Plat End 2 x 6 x 40-1/2"

T*  1  35333-102  Stair Platform End 2 x 6 x 40-1/2"

U  1  35449-102  Narrow Spacer 54 x 4 x 27-1/4"

V  1  50277-100  Rock Pack (12), Green

W  1  40400-100  Climbing Rope

X*  1  15133-400  Slide Mount, Green
Y  5  14203-400  Steel Rung, Green 1" Dia x 18"
Z  10  15154-400  Rung Collar, Green, 1" Dia x 7/8"

A  1  33978-102  Ladder Slat 5/4 x 4 x 18-3/4"

B  9  35202-102  Wall Slat 5/4 x 6 x 29-1/2"

C  5  35334-102  Ladder Step 2 x 6 x 15-1/2"

D  8  35337-102  Deck Board 5/4 x 6 x 47"

E*  1  35338-102  Ctr Deck Board 5/4 x 6 x 46-7/8"

F  4  35339-102  End Deck Board 5/4 x 6 x 40-3/8"

G  1  35340-102  Upper Support 2 x 6 x 47"

H  1  35341-102  Upper Rope Support 2 x 6 x 47"

4  15034-100  Plastic Handgrip, Yellow

 

1  50559-700  Northbridge Hardware

Component Part Identification:

Take inventory of all parts, making sure nothing is missing or 

defective. If you find that parts are missing or defective call 

the Creative Playthings Customer Service Department at 

1-800-598-4997.         *  Not visible in illustration on Page 6

NORTHBRIDGE BOX 1 - 63085-641

NORTHBRIDGE BOX 2 - 63085-642

NORTHBRIDGE BX 3 - 63085-603

63085-644

Boxes for Northbridge with Tent

 

63085-641  Northbridge Box 1

63085-642  Northbridge Box 2

63085-603  Northbridge Box 3

63085-644  Northbridge Tent w/ Posts

63045-505  Tire Swing & Swivel

8570-202  10 Ft. Green Wave Slide

63080-101  3 Position Swing Beam

AA934-204  2 Swings, 1 Trapeze

Other Parts

AS  1  8570-202  10 Ft. Green Wave Slide
 

  63080-101  Classic Pine 3 Position Swing Beam (Swing  

 

   

Mount included with Swing Beam)

AT    63045-505  Tire Swing and Swivel

Summary of Contents for NORTHBRIDGE W/ TENT























Reviews: