© Copyright 2016, Creative Playthings
NORTHBRIDGE WITH TENT
19949-100 Rev C (05-18)
Page 14
ASSEMBLY INSTRUCTIONS
STEP 17 – Step Support:
Fasten the top of the Step Support (O) to the Rope Platform
End using one 5/16 x 3" Hex Bolt Assembly.
Fasten the bottom of the Step Support to the Rope Base Rail
using one 5/16 x 4-1/2" Hex Bolt Assembly.
Leave the fasteners very loose to ease insertion of the Steps.
STEP 16 – Side Supports:
Loosely fasten one Side Support (AE) to the
Rope Base Rail using one 5/16 x 3" Hex Bolt
Assembly through one hole.
Swing the Side Support to rest against the
side of the Leg. Mark and drill a 1/4" diameter
pilot hole into the Leg.
Add another 5/16 x 3" Hex Bolt Assembly to
the Side Support and Base Rail. Use a 5/16 x
3-1/2" Lag Screw with a 5/16" Flat Washer to
secure the Side Support to the Leg. Tighten
all fasteners.
Repeat with the other Side Support on the
other side of the gym.
Front of
the Gym
STEP 15 – Legs to Posts:
Use a 5/16" diameter drill to bore pilot holes into the
Posts
where the holes in the legs meet the posts. Fasten
the Legs to the Posts using 3/8 x 5-1/2" Lag Screws and 3/8"
Flat Washers.
AE
O
3/8 x 5-1/2" Lag Screw
5/16 x 3-1/2" Lag Screw
5/16 x 3" Hex Bolt
5/16 x 3" Hex Bolt
5/16 x 4-1/2" Hex Bolt
