64
VOCE Media
Se
cti
o
n
6
- Se
rvi
ce
Ke
yp
ad
F
u
n
cti
o
n
s
6.5 Button
- View Counters
The View Counters button (5) enables the operator to access the Data Recall Menu. Entry
into this menu allows the operator to view Non-Resettable and Resettable Sales Data,
view data relating to Timed Events and Identification Numbers of installed components
and (if the feature is enabled) view SureVend™ assisted vend data. The Resettable Sales
Data and SureVend™ Data menus contain an extra sub-menu which allows the operator
to delete the current data from the machines memory. Refer to Para. 5.3 Data Recall
Menu for full details relating to this menu and its contents.
6.6 Button
- Test Vend
The Test Vend button (6) enables the operator to vend a drink from the machine to
ensure correct operation after cleaning or maintenance.
1. When the button is pressed and released the LCD will display the screen as shown
opposite. Press a drink selection button followed by the START/? button to begin
the vend sequence.
2. Ensure that the selection is correct, has not under/overfilled the cup and most
importantly, tastes good!
3. Press the X (Exit) key on the drink selection keypad to exit from the Test menu and
return to stand-by mode.
6.7 Button
- Cup Test
This button enables the operator to test the operation of the cup drop unit after refilling
the cup stacks. When the button is pressed the cup drop motor is operated and a cup is
ejected from the cup drop unit. This function ensures that the mechanism is working
correctly.
6.8 Button
- Park Head
When this button is pressed, the dispense head moves to its fully extended position and
stops. Press the button again to return the dispense head to its correct (homed) position.
6.9 Button
- Boiler Fill (B2C Machines)
When this button is pressed, the machine pumps a measured amount of water through
the system - approximately 600ml, heating it as it does so. This ensures that heated water
is immediately available when a drink is selected. This button should also be used to
purge any water left in the system after the machine has been moved or shut down for
any length of time.
Note: This should be used if there is an air lock in the closed loop system i.e. after an
install or the machine has been serviced.
Summary of Contents for Voce Media
