Crane Voce Media, Technical Manual

Page: 26 / 116

18 VOCE Media
Se
cti
o
n
4
- P
ro
gr
am
m
in
g
Mo
d
e
4.3 Accessing the Programming Mode
To gain access to the programming mode:
1. Open the front door of the machine.
2. The screen below is displayed.
3. Using the touch-keys enter the correct four digit code PIN to access the required
programing mode.
4. Press OK to enter the program, the Main Menu screen is displayed.
5. The factory default Engineer’s code is 4444 and the Operator’s 3333. These maybe
changed if required.
4.4 Entering or Updating Parameters
There are various forms of screens to change the configuration parameters of the
machine, from Check Boxes, Radio Buttons to Value Increment and Value Entry.
4.4.1 Check boxes
These are used where there is a multiple selection of parameters available, in this
example drink selections.
1. Press the illuminated touch-key next to the required selections and a tick appears
in the check box. Press again to remove the tick.
2. When all the required selections have been made press
the Up one Level icon to return to the previous screen.