Crane Voce Media, Technical Manual

Page: 3 / 116

Technical Manual III
In
tr
o
d
u
cti
o
n
/
Im
p
o
rta
n
t
In
fo
rm
ati
o
n
A FRESH APPOACH TO VENDING
The following Symbol is used throughout this Manual:
Safety First! Take care, risk of personal injury.
Crane Merchandising Systems accepts no responsibility for damage caused to the
equipment through misinterpretation or misuse of the information contained in this
manual.
© Copyright 2012 Crane Merchandising Systems
Introduction
This manual provides you with guidance on the installation, daily operation and basic
maintenance of your VOCE Media freestanding vending machine. Crane Merchandising
Systems always recommend that a trained technician service its equipment.
Crane Merchandising Systems is committed to continuous product improvement. This
means that the information within this document, although correct at time of publication,
is for guidance only and may be subject to change without prior notice.
Important Safeguards
Always follow these basic safety precautions when operating or maintaining your
machine:
1. Ensure that you and anyone who operates or maintains your machine has this
manual available for quick and easy reference, read all instructions carefully before
commencing work.
2. Beware of Electricity Certain maintenance operations require your machine to
remain connected and switched on. Only trained personnel should carry out these
routines, and independently of all other operations. Observation of safe working
practices in accordance with current regulations is necessary at all times.
Important! Unless otherwise specified, always disconnect your machine from the
electrical supply before commencing work.
3. Servicing the Heater Tank/Espresso pressurised water system.
Important! Water in this machine can exceed 99°C/210°F. Water at this
temperature can cause severe injury. Espresso machines may be fitted with a
pressurised water system, under no circumstance should this be dismantled other
than by a full trained engineer.
4. Do not operate your machine if any part is damaged until a service technician has
carried out necessary repairs and ensured that it is safe.
5. Beware of moving components when servicing the machine.
6. Allow your machine to cool before handling or moving.
7. Never immerse your machine in water or any other liquid and never clean it with a
water jet.
8. In machines fitted with carbonator units the CO
2
bottle is filled with gas at up to
800psi and MUST be secured in an upright position. In the event of a leak, ventilate
the area in the vicinity