Crane Voce Media, Technical Manual, Page: 91 / 116

Technical Manual 83
Se
cti
o
n
10
- D
ia
gn
o
stic
an
d
Ma
in
te
n
an
ce
P
ro
ce
d
u
re
s
A FRESH APPOACH TO VENDING
Error Message Fault Description Additional information
Card Reader No Comms The MDB card reader is not
responding to commands.
Card Reader Manuf Trans
Error
The card reader reports that
there is a manufacturer’s
transient error.
Card Reader Comms Error The card reader reports that
there is a communications
error.
Card Reader Service Error The card reader reports that
there is a service error.
Card Reader Manufact OOS
Error The card reader reports that
there is a manufacturer’s
error and out of service.
Bill Validator No Comms The bill validator is not
responding to commands.
Bill Validator Motor Error The bill validator is reporting
a motor error.
Bill Validator Sensor Error The bill validator is reporting
a sensor error.
Bill Validator ROM Error The bill validator is reporting
a ROM error.
Bill Validator Acceptor
Jammed The bill validator is reporting
that the acceptor is jammed.
Bill Validator Stacker Error The bill validator is reporting
a stacker error.
Bill Validator Stacker Full The bill validator is reporting
that the stacker is full.
Bill Validator Disabled The bill validator is reporting
that it is disabled.
Water heating Water temperature in main
boiler is below operating
temperature.
The error is cleared once operating
temperature is achieved by pressure
boiler. The machine will disable all hot
drinks using main boiler if the
temperature falls below min vend
temperature. The drinks will be re-
enabled once min Vend temperature is
achieved.