Crane Voce Media, Technical Manual, Page: 102 / 116

94 VOCE Media
Se
cti
o
n
10
- D
ia
gn
o
stic
an
d
Ma
in
te
n
an
ce
P
ro
ce
d
u
re
s
3. Take the new grinder body complete with inner grinder ring from the service kit.
Screw the grinder body clockwise into the blade housing until it stops.
Re-set the grinder blades. An approximate starting position is achieved by turning
the grinder body back one full turn anti-clockwise. Re-assemble the grinder
adjuster wheel assembly to the grinder unit.
4. Refit the fresh beans container to the machine. Pull the bean canister shut- off to
its fully extended position.
5. Turn on the electricity supply to the machine.
Important! Before returning the machine to service, the engineer must carry out
the Grinder Calibration routine (see Para 5.7.2.1) to ensure correct operation of the
grinder with the type of beans used in the machine. Use the grinder adjuster wheel
to fine tune the blade settings in order to obtain the desired grind quality.