Crane Cafe VII, Setup Manual

Page: 47 / 84

6840070 Page 41
August, 2005
Café VII
®
Setup
d. Press . The display shows:
NUK_
+
===QKSR
. This means that the
extra-strong dispense time for hot chocolate is currently 4.65 seconds.
You want to leave this time alone, so don't enter anything.
e. Press . The display shows:
NUK
*
===lk
. This means that hot
chocolate is always whipped. Press . The display now shows:
NUK
*
===lmq
, and the customer has to press to get a cup of whipped
hot chocolate.
f. Press . The display shows:
NUKA==moKP
. This means you have
finished with the setup for this selection. Other selections will have
more options, such as ground coffee, but they are handled in the same
way.
5. Press twice to exit the SET UP mode.
6. If your machine is configured with whitener, you have the capability of
dispensing additional drinks, including Cafe' Mocha, Cappuccino, and Caffe'
Latte. These new drinks allow for full control over the timers. In addition,
there is a percentage screen which allows you to compute approximate times
for these drinks as a "starting point" for setup.
When computing new times for Café Mocha, Cappuccino, and Caffè Latte,
the program uses times from existing coffee, hot whitener, and hot chocolate
drinks (base drinks) if they are available. If those drinks do not exist, then
standard default times will be used in the computation. For the most
accurate computed times, set up the "base" drinks prior to the multi-product
recipes.
To use this feature, execute the setup selection sequence for the key
programmed to Café Mocha, Cappuccino, and Caffè Latte. Step down to the
appropriate percentage code "G". "G" is used for all three drinks; "H" is
only used for Café Mocha. Enter the desired percentage(s), then
To check water settings, hold a container under the canister spout.
Press , then . The canister motor will run and you
can measure the dispensed product using a suitable gram-
measuring scale or balance. Press the interlock in to the middle