Page 24
6840070
August, 2005
Café VII
®
Setup
Programming your machine is straightforward and easy to do. Before you get
started, take some time to look over these steps that need to be completed prior to
any other programming.
INITIAL STEPS
1.
Open the door.
2.
Insert your key in the carafe key switch and turn it 90° clockwise to the ON
position. This tells the machine that you are about to do some programming
steps.
3.
You generally enter a function by pressing
, followed by a number
key. For example, to enter the SERVICE mode you press
, then
.
INSIDE A FUNCTION
Pressing
moves you forward through all the different programming
screens. There is no way to move backwards, so if you have to go back to a
previous screen, just press
until that screen shows up again. If you can
choose between two or more options in a function, pressing
switches
between the options.
LEAVING A FUNCTION
There are two ways to leave a function:
1.
Press
twice, or press and release the door switch. This returns you to
the standby message.
2.
Press
and the number key for another function. You go directly to
that function.
PROGRAMMING
Summary of Contents for Cafe VII
