Page 12
6840070
August, 2005
Café VII
®
Setup
WATER LINE CONNECTIONS
FACTORY AND FIELD SUPPLIED PARTS
The water inlet on the unit comes from the factory with a 1/4" female
compression fitting. The factory also ship an addapter for use with a 3/8" line, as
illustrated below. All other components are field supplied. When code permits
the use of plastic tubing, use appropriate inserts at the connections to prevent
collapse..
FLUSHING LINES
Water lines should be flushed before connecting to the machine. This will
prevent sediment from entering the unit.
SEALING THE UNIT TO THE COUNTER TOP
FACTORY AND FIELD SUPPLIED PARTS
A sealing strip is supplied by the factory. Remove the paper back from a section
of the strip and apply to the base. Work a length at a time going completely
around the base of the unit. Seal must contact both the unit and the counter top.
No other parts are needed for this operation.
Summary of Contents for Cafe VII
