Crane Cafe VII, Setup Manual

Page: 37 / 84

6840070 Page 31
August, 2005
Café VII
®
Setup
KEY MAPPING/DRINK RECIPES
The display will show
hbv=j^m
for a moment, then the display shows:
uuuuuuu
(The seven "X"s are occupying positions representing the buttons numbered 3
through 9):
Notice that the seven characters are shown as boxes. This is because each
selection button is represented by a position in the display, but any number
between 0 and 9 or any letter between A and K can be in that position. All this
allows you to take advantage of a very flexible custom menu setup.
The keymap is used to choose which recipes will be assigned to which keys.
To assign a recipe to a key, press the intended key repeatedly until the number
or letter of the desired recipe appears. Repeat this for all keys. When the
keymap is satisfactory, save the new map by pressing and .
Note that there are more possible recipes than keys. Because of this and other
factors, it is important to reload the timers after altering the keymap, even if
only the order of recipes was changed. This may be done manually or by using
the default load screen following the keymap screen.
If any recipes are not possible with the current configuration, that recipe letter
will be skipped on the keymap screen.
Each number between 0 and 9 or letter between A and K represents a selection.
All current recipes are listed below, along with any restrictions which may
accompany them. Note that recipes 0 - 9 can be made with all machines, but
recipes A - K are only available with machines configured for whitener.
Code Definition
0 No selection is assigned to this button.