Crane Merchandising Systems Merchant 180 Page 53 Operator'S Manual Download

Page: 53 / 170

Merchant™ Operators’ Guide

Program-

1810006

January 2008

View Non Resettable Sales and Vend Data (continued)

4. The

Overall Totals

menu displays both the

total dollar amount and total vend amounts

for the following data:
•

Sales

•

Discount

•

Test Vend

•

Surcharge

•

Free Vend

Overall Totals

Sales-$

688.75

Sales-#

551

Discounts-$

0.50

Discounts-#

Test Vend-$

8.75

Test Vend-#

5. For example,

Sales-$

Displays the total merchandiser sales in dollars.

Sales-#

Displays the total number of merchandiser vends (Sales totals includes Discount,

Test Vend, Surcharge and Free Vend totals.)

Discount-$

Displays the total dollar value of all discounts in dollars (ex. 5 discount vends of
10% on $1.00 selection will total $.50.)

Discount-#

Displays the total number of discounted vends.

Test Vend-$

Displays the total dollar value of all test vends.

Test Vend-#

Displays the total number of test vends.

Surcharge-$

Displays the total dollar value of all surcharges.

Surcharge-#

Displays the total number of surcharge vends.

Free Vend-$

Displays the total dollar value of free vends.

Free Vend-#

Displays the total number of free vends.

6. Press

and

to scroll through the entire list.

7. Press

once to return to the

Non Resettable Sales Data

menu or continue to press

to return to the

Main Menu

Summary of Contents for Merchant 180











































































































































































Search results

Summary of Contents for Merchant 180

Reviews:

Related manuals for Merchant 180

Brands by name

Popular brands

Crane Merchandising Systems Merchant 180, Operator'S Manual

Search results

Summary of Contents for Merchant 180

Reviews:

Related manuals for Merchant 180

Brands by name

Popular brands