CRADLEPOINT
CBA750B | USER MANUAL Firmware version 5.0
© 2013
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 91
7.1 Connection Manager
The router can establish an uplink via any modems plugged into a modem port. If there is more than one modem attached
and the primary connection fails, the router will automatically attempt to bring up a new link on another device. This
feature is called failover. If Load Balance is enabled, multiple WAN devices establish a link at the same time.
7.1.1
WAN Interfaces
This is a list of the available interfaces used to access
the Internet. You can enable, stop, or start devices from
this section. By using the priority arrows (the arrows in
the boxes to the left—these show if you have more than
one available interface), you can set the interface the
router uses by default and the order that it allows
failover.
Load Balance:
If this is enabled, the router will use multiple WAN interfaces to increase the data transfer throughput by
using any connected WAN interface consecutively. Selecting Load Balance will automatically start the WAN interface and
add it to the pool of WAN interfaces to use for data transfer. Turning off Load Balance for an active WAN interface may
require the user to restart a current browsing session.
Enabled:
Selected by default. Deselect to disable an interface.
Click on the small box at the top of the list to select/deselect all devices for either
Load Balance
or
Enabled
.
Click on a device in the list to reveal additional information about that device and to enable configuration options.
Summary of Contents for CBA750B
Page 1: ......