Cradlepoint CBA750B Product Manual Download

Page: 41 / 172

CRADLEPOINT

CBA750B | USER MANUAL Firmware version 5.0

CRADLEPOINT, INC. PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 39

Local Networks

“

Detailed Info” links to

Network Settings

→

Local Networks

•

Clients:

The number of current clients.

For each network, the following information is displayed:

•

Network Name: IP Address/Netmask

Route Mode:

NAT (Network Address Translation), Standard (NAT-less), IP Passthrough, or Disabled.

Access:

Admin Access, LAN Isolation, UPnP (Universal Plug and Play), and/or DHCP.

To configure a network, see

Network Settings

→

Local Networks

5.2.1

Router Alerts

On the right side of the

Dashboard

page is a brief set of “

Router Alerts

” that state basic

information such as whether the router is running properly. This will inform you about the
availability of new firmware, for example.

Router Alerts

includes links to the

System Software

page (for new firmware) and the

Connection Manager

Summary of Contents for CBA750B













































































































































































Search results

Summary of Contents for CBA750B

Reviews:

Related manuals for CBA750B

Brands by name

Popular brands

Cradlepoint CBA750B, Product Manual

Search results

Summary of Contents for CBA750B

Reviews:

Related manuals for CBA750B

Brands by name

Popular brands