CRADLEPOINT
CBA750B | USER MANUAL Firmware version 5.0
© 2013
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 104
7.1.6
Modem Settings
Not all modems will have all of the options shown below; the available options are specific to the modem type.
On Demand:
Typically modem connections are not
always on. When this mode is selected a connection to
the Internet is made as needed. When this mode is not
selected a connection to the Internet is always
maintained.
IP WAN Subnet Filter:
This feature will filter out any
packets going to the modem that do not match the
network (address and netmask).
Aggressive Reset:
When Aggressive Reset is enabled the system will attempt to maintain a good modem connection. If
the Internet has been unreachable for a period of time, a reset of the modem will occur in attempt to re-establish the
connection.
Enable Aux Antenna:
Enable or disable the modem's auxiliary diversity antenna. This should normally be left enabled.
Modem Connection Mode:
Specify how the modem should connect to the network. Not all options are available for all
modems; this will default to Auto if an incompatible mode is selected.
•
Auto (all modes):
Let the modem decide which network to use.
•
Auto 3G (3G or less):
Let the modem decide which 2G or 3G network to use. Do not attempt to connect to LTE.
•
Force LTE:
Connect to LTE only and do not attempt to connect to 3G or WiMAX.
•
Force 3G (EVDO, UMTS, HSPA):
Connect to 3G network only.
•
Force 2G (1xRTT, EDGE, GPRS):
Connect to 2G network only.
See the following tables for a breakdown of the technologies used with various CradlePoint ARC models when any
Modem Connection Mode
is selected.
Summary of Contents for CBA750B
Page 1: ......