manualshive.com logo in svg

Cradlepoint CBA750B, Product Manual, Page: 95 / 172

Share
Download
Cradlepoint CBA750B Product Manual Download Page 95

CRADLEPOINT 

CBA750B | USER MANUAL Firmware version 5.0 

© 2013 

CRADLEPOINT, INC.                                        PLEASE VISIT 

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

 FOR MORE HELP AND RESOURCES 

 

 

 

  PAGE 93  

 

7.1.3

 

General Settings 

•

 

Enabled: 

Select/deselect to 

enable/disable.

 

•

 

Force NAT: 

Normally the LAN Route 

Mode controls the use of NAT 
(network address translation). When 
this option is selected the router will 
always perform NAT when traffic is 
sent out from this device.

 

•

 

Priority: 

This number controls failover 

and failback order. The lower the 
number, the higher the priority and the 
more use the device will get. This 
number will change when you move 
devices around with the priority arrows 
in the WAN Interfaces list.

 

•

 

Load Balance:

 Select to allow this 

device to be available for the Load 
Balance pool.  

•

 

Download bandwidth:

 Defines the 

default download bandwidth for use in 
Load Balance algorithms. (Range: 128 
Kb/s to 76800 Kb/s.) 

•

 

MTU: 

Maximum transmission unit. This is the size of the largest protocol data unit that the device can pass. 

(Range: 46 to 1500 Bytes.)

 

 

 

Summary of Contents for CBA750B













































































































































































Reviews:

No comments