CRADLEPOINT
CBA750B | USER MANUAL Firmware version 5.0
© 2013
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 84
6.5.3
Local Network Interfaces
Each LAN type—Ethernet and VLAN—has a separate section with configuration options. Unless the default configuration
is sufficient, YOU MUST CONFIGURE EACH INTERFACE SEPARATELY in order to create the desired interface options
for a network. You can then select these interfaces to add to a network in the
Local Network Editor
(see above).
Select from the following tabs:
•
Ethernet Port Configuration
•
VLAN Interfaces
Ethernet Port Configuration
Ethernet Port Configuration provides controls for your router’s Ethernet port. While default settings will be sufficient in
most circumstances, you have the ability to control the
Link Speed
. Additional controls for WAN ports are available in
Internet
→
Ethernet Settings
.
Link Speed:
Default setting is Auto. The Auto setting is preferred in most cases.
•
Auto
•
10Mbps - Half Duplex
•
10Mbps - Full Duplex
•
100Mbps - Half Duplex
•
100Mbps - Full Duplex
•
1000Mbps - Full Duplex
Summary of Contents for CBA750B
Page 1: ......