CRADLEPOINT
CBA750B | USER MANUAL Firmware version 5.0
© 2013
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 110
7.1.10
Update/Activate a Modem
Some 3G/4G modems can be updated and activated while plugged into the router. Updates and activation methods vary
by modem model and service provider. Possible methods are: PRL Update, Activation, and FUMO. All supported methods
will be displayed when you select your modem and click “Control”. If no methods are displayed for your device then you
will need to update and activate your device externally.
To update or activate a modem, select the device and click
“Control”.
The modem
does not
support Update/Activate methods:
A
message will state that there is no support for PRL Update,
Activation, or FUMO.
The modem supports Update/Activate methods:
A message
will display showing options for each supported method:
•
Modem Activation / Update:
Activate, Reactivate, or
Upgrade Configuration.
•
Preferred Roaming List (PRL) Update
•
Firmware Update Management Object (FUMO)
Click the appropriate icon to start the process.
If the modem is connected when you start an operation the
router will automatically disconnect it. The router ma
y start
another modem as a fail
over measure. When the
operation is
done the modem will go back to an idle state, at which point the
router m
ay restart it depending on failover and failback settings.
NOTE: Only one operation is supported at a time. If you try to start the
same
operation on the
same
modem twic
e the UI will
not
report failure and the
request will finish normally when the original request is done. However if you
try to start a
different
operation or use a
different
modem
,
this second request
will
fail
without interfering with the pending operatio
n.
Summary of Contents for CBA750B
Page 1: ......