Cradlepoint CBA750B Product Manual Download | Manualshive

Page: 64 / 172

background image

CRADLEPOINT

CBA750B | USER MANUAL Firmware version 5.0

© 2013

CRADLEPOINT, INC. PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 62

6.3 DNS

DNS, or Domain Name System, is a naming system that translates between domain names (www.cradlepoint.com, for
example) and Internet IP addresses (206.207.82.197). A DNS server acts as an Internet phone book, translating between
names that make sense to people and the more complex numerical identifiers. The DNS page for the CBA750B has these
distinct functions:

•

DNS Settings:

By default your router is set to automatically acquire DNS servers through your Internet provider

(Automatic).

DNS Settings

allows you to specify DNS servers of your choosing instead (Static).

•

Dynamic DNS Configuration:

Allows you to host a server (Web, FTP, etc.) using a domain name that you have

purchased (www.yourname.com) with your dynamically assigned IP address.

•

Known Hosts Configuration:

Allows you to map a name (printer, scanner, laptop, etc.) to an IP address of a

device on the network.

6.3.1

DNS Settings

You have the option to choose specific DNS servers for
your network instead of using the DNS servers assigned
by your Internet provider. The default DNS servers are
usually adequate. You may want to assign DNS servers if
the default DNS servers are performing poorly or if you
have a local DNS server on your network.

Automatic Config:

Automatic or Static (default:

Automatic). Switching to “Static” enables you to set specific DNS servers in the

Primary DNS

and

Secondary DNS

fields.

Primary DNS

and

Secondary DNS:

If you choose to specify your DNS servers, then enter the IP addresses of the

servers you want as your primary and secondary DNS servers in these fields. The DNS server settings will be pre-
populated with public DNS server IP addresses. You can override the IP address with any other DNS server IP address of
your choice. For example, Google Public DNS servers have the IP addresses 8.8.8.8 and 8.8.4.4 while 4.2.2.2 and 4.2.2.3
are servers from Level 3 Communications.

Force All DNS Requests To Router:

Enabling this will redirect all DNS requests from LAN clients to the router's DNS

server. This will allow the router even more control over IP addresses even when clients have their own DNS servers
statically set.

«
...
62
63
64
65
66
...
»

Summary of Contents for CBA750B













































































































































































Reviews:

No comments

Related manuals for CBA750B

Brand: HAGOR Pages: 8

Brand: ICON Pages: 6

Brand: MillSO Pages: 2

ICY BOX IB-AA534-C

Brand: RaidSonic Technology Pages: 12

PS-100 Bluetooth Printer Adapter

Brand: Hama Pages: 8

Brand: WENKO Pages: 4

Brand: Troy-Bilt Pages: 22

Brand: Gigabyte Pages: 39

Brand: Corinex Pages: 26

Brand: Chauvet Pages: 3

Brand: MUKii Pages: 24

Brand: Techly Pages: 2

ICOC U3AMF-HY-010

Brand: Techly Pages: 8

ICOC DSP-VH1220

Brand: Techly Pages: 12

Brand: Techly Pages: 12

Brand: Recom Pages: 5

Brand: Diablotek Pages: 3

Brand: Natec Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands