©2015 Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
|
cradlepoint.com
90
User Manual
/
AER3100/AER3150
LLDP
LAN Gateway Address
: Input the IP address of the
LAN side connection. If this is a 3G/4G failover router
operating behind another router, the LAN Gateway
Address is the IP address of that other router.
DNS Server
and
Secondary DNS Server
: The primary
and secondary DNS server numbers match the static
DNS values (set at
NETWORKING > DNS Servers
). You
can leave the default values or set them manually here.
(Changing these values also changes the static DNS
values.)
The
Link Layer Discovery Protocol
(LLDP) is a standard
method for network devices to share information about
themselves among their neighbors. The router stores the
information it receives from its neighbors, which can be
viewed on the
STATUS > LLDP
page.
Enable LLDP for Ethernet on the WAN and/or LAN.
TEMPERATURE
Use this to track the internal temperature with alerts/logging. The router also has a mechanism to shut down
functions when the internal temperature is dangerously high (80 °C).
Router Temperature (°C)
,
Modem Temperature (°C)
:
These display the router or modem’s current temperature
in degrees Celsius.
Minimum Temperature
: (Default: 10 °C.) If the device
drops to this temperature, an alert will automatically be
generated.
Maximum Temperature
: (Default: 70 °C.) If the device
reaches this temperature, an alert will automatically be
generated.
To configure minimum and maximum temperature alerts,
use one of the following methods:
1.
Enable these alerts in
Enterprise Cloud Manager
.
2. Set up an SMTP email server in
SYSTEM > Device Alerts
.
