Cradlepoint AER1600 Series User Manual Download Page 97

Page: 97 / 104

+1.855.813.3385

cradlepoint.com

User Manual

AER3100/AER3150

•

Device Console

: Access router’s command line

interface (CLI) console.

Scheduled Reboot

•

Scheduled Reboot

: Router will restart at

user-specified time.

•

Enable Watchdog Reboot

: Router will restart

when it determines an unrecoverable error
condition has occurred.

DIAGNOSTICS

Ping Test

A simple test to check Internet connectivity.
Type the Hostname or IP address of the
computer you want to ping and click the ‘

Ping

’

button.

Speed Test

•

Tests Against Cradlepoint Server

- Up to

ten speed tests are permitted against a
Cradlepoint server.

•

WAN Device

- The WAN Device that is

selected will have the test run on it. If no
device is selected then the highest priority
connected device will be used.

•

Custom Server

- Type the Hostname or IP

address of the server to which you wish to
perform a test. If left empty the test will
be done to a Cradlepoint server.

•

Custom Port (Optional)

- The port to which

the test is directed.

•

Max Duration

- The Max Duration is the

Maximum amount of time for which the

test should be run. The test may finish
sooner if sufficient data is collected.

•

Data Limit

- The Data Limit is the limit of how much data will be transferred while measuring the connection

speed; this should be limited to reduce the expense of a speed test. Setting the limit to 0 will cause the test
to run until enough data is collected or the duration limit is met.

•

Test Type

- Select the type of test you would like to run. TCP Upload will test speed going to the server, TCP

Download will test speed coming to the client, and UDP will measure the speed going to the server.

Summary of Contents for AER1600 Series






































































































Search results

Summary of Contents for AER1600 Series

Reviews:

Related manuals for AER1600 Series

Brands by name

Popular brands

Cradlepoint AER1600 Series, User Manual

Search results

Summary of Contents for AER1600 Series

Reviews:

Related manuals for AER1600 Series

Brands by name

Popular brands